Fitness spaces in Bethesda, Silver Spring, Rockville and DC range from boutique studios to large gyms that never close. Walls take hits from equipment, locker rooms stay humid, and pool rooms are hard on almost any coating.
We plan work around your hours, often overnight and in zones, and pick products for each room rather than using one paint everywhere. Rubber and concrete floors are coated through our floor coating process, open ceilings and exposed steel are sprayed using the same methods as our industrial painting, and dented walls are fixed with drywall repair before we paint.
What we paint
Workout floors and walls
Scrubbable, impact-resistant finishes for high-contact walls.
Locker rooms and showers
Moisture-tolerant coatings over properly filled block.
Pools and natatoriums
Coatings made for humid, chlorinated air.
Open ceilings
Exposed ducts and deck sprayed with dryfall coatings.
Brand walls and graphics
Large color-blocked and graphic walls from your artwork.
Concrete floors
Coated floors for turf-free zones, entries and locker rooms.
Local insight: fitness spaces
Locker rooms need moisture-tolerant systems
Constant steam gets into block walls and lifts ordinary paint. Concrete block needs a block filler first to seal the pores, then a moisture-tolerant epoxy or high-performance acrylic. Good exhaust ventilation matters as much as the coating.
Pool air is chemically aggressive
Humid, chlorinated air in indoor pools corrodes steel and breaks down standard paints fast. Natatoriums need coatings rated for that environment on walls, ceilings and any exposed steel, and they need to be applied when the space can be ventilated.
Dryfall keeps overspray off the floor
The black open-ceiling look is common in newer studios. Dryfall coatings dry in the air before overspray reaches the floor, so it sweeps up as dust. That makes spraying ceilings possible above a gym floor with less masking.
How a gym project runs
Walk and zone plan
Areas grouped by coating and by when they can close.
Prep
Degreasing, block filling and wall repairs.
Apply by zone
Overnight or during low-traffic hours.
Cure and ventilate
Areas reopened when coatings are ready for use.
Gym and fitness center painting questions
Can you work in a 24-hour gym?
Yes. We close one zone at a time during the quietest hours and keep the rest of the gym open.
Can you paint our logo or a mural?
We paint large graphic walls and color-blocked designs from your artwork. For fine-art murals, we can prep and prime the wall for your artist.
How soon can members use a locker room after painting?
It depends on the coating and ventilation. We schedule locker rooms so the coating has cured before steam and water return, and give you the reopening time in advance.